Vandaag toch eindelijk sonos systeem gekocht.
Playbar. 2x play 1. Sub. En de connector.
Alles mooi en wel aangesloten.
Maar nu Krijg ik wel elke keer van de televisie een melding als ik hem zachter of harder wil zetten .
Hoe kan ik dit uit zetten ?
Groet
rembojr
Bladzijde 1 / 1
Check deze link even: https://ask.sonos.com/sonos/topics/turning_off_the_samsung_f8500_tv_message_when_playbar_is_connected
Dankjewel. Zal het morgen ff allemaal proberen.
Helaas dit werkt niet. Sonos herkent de andere afstand bediening niet.
Het 2e gedeelte van de link werkte bij mij wel en verhielp het probleem;
This now brings us to the issue of the on-screen notifications that pop up when a command is given from the Smart Remote. The Smart Remote has been configured to work with the PLAYBAR at this point, but the TV still thinks that the Smart Remote is giving it volume commands. This results in the notification on screen that you're using remote speakers. To stop this message from popping up, please follow these steps:
1. Using your Smart Remote, navigate to Menu > System > Device Manager > Universal Remote Setup.
2. Press the Start button and add an HTS (Home Theater System).
3. Choose the optical output.
4. Choose Samsung as the company. As noted in posts above, different brands selected here also work with Sonos.
5. You'll now see a verification screen where the TV will try and test if it can power up the HTS. You can ignore this message and select Yes.
6. Finally, when watching TV, use the on-screen remote to switch to external speakers.
The Smart Remote will now be configured to control the PLAYBAR and the TV will be configured to stop responding to the Smart Remote's volume commands, eliminating the on-screen pop-up. The TV will still send Smart Remote volume commands to the PLAYBAR using the IR extender that was configured earlier.
This now brings us to the issue of the on-screen notifications that pop up when a command is given from the Smart Remote. The Smart Remote has been configured to work with the PLAYBAR at this point, but the TV still thinks that the Smart Remote is giving it volume commands. This results in the notification on screen that you're using remote speakers. To stop this message from popping up, please follow these steps:
1. Using your Smart Remote, navigate to Menu > System > Device Manager > Universal Remote Setup.
2. Press the Start button and add an HTS (Home Theater System).
3. Choose the optical output.
4. Choose Samsung as the company. As noted in posts above, different brands selected here also work with Sonos.
5. You'll now see a verification screen where the TV will try and test if it can power up the HTS. You can ignore this message and select Yes.
6. Finally, when watching TV, use the on-screen remote to switch to external speakers.
The Smart Remote will now be configured to control the PLAYBAR and the TV will be configured to stop responding to the Smart Remote's volume commands, eliminating the on-screen pop-up. The TV will still send Smart Remote volume commands to the PLAYBAR using the IR extender that was configured earlier.
The Smart Remote will now be configured to control the PLAYBAR and the TV will be configured to stop responding to the Smart Remote's volume commands, eliminating the on-screen pop-up
Wat wij altijd doen, is de speakers van de tv aanlaten in het menu. (Van de tv) daarna een hoofdtelefoonplug in de tv doen. Nu worden de tv speakers uitgeschakeld. Als je mbv van de samsung afstandsbediening harder zet, gaat de bar harder en op de tv zie je alleen de volumeregeling met een hoofdtelefoon teken.
Succes
Succes
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.